Description

Ever get confused which overlay to put on your skis or board on race day? No need to with Nanox Supernano III.

New & improved - Supernano 3 is a Race Finishing Wax designed for more humid and/or dirty snow conditions at temperatures from -3 to 3ºC / from 26.6 to 37.4ºF. It has the absolute highest acceleration level, is extremely dirt and weather resistant and is a fluorine-free glide wax. Designed to be used on its own or as an overlay on top of CFX II race wax when desired. Supernano 3 is 15g will last up to 100 pairs of skis.

KEY FEATURES & BENEFITS

1. Nanox Supernano III is a Race Finishing wax designed for more humid and/or dirty snow conditions at temperatures around 0ºC.
2. Supernano III has the absolute highest acceleration level.
3. Extremely dirt and moisture resistant.
4. It's Non-toxic = does NOT contain Flourocarbons.
5. Designed to be used all on its own or as an overlay on top of CFX II race wax when desired.
6. 15 grams will last up to 100 pairs of skis.

APPLICATION - OPTION 1

1. Clean the base with your preferred method. 
2. Rub a thick layer onto the base.
3. Iron the wax in at 120°C / 248°F with only 1 pass of the iron.
   
4. Brush/polish out the wax almost immediately with a SIDECUT stiff nylon brush.
5. Let stand until completely cooled and re-brush using back and forth or 'scrubbing technique' (re-brush prior to start optional). 

APPLICATION - OPTION 2

1. If ironing is not possible then apply an even thicker layer of Supernano Ill on top of CFX II race wax.
2. Immediately brush/polish with firm pressure in both directions ('scrubbing technique') with a stiff SIDECUT nylon brush until an extremely high sheen is achieved. Finish with a SIDECUT soft nylon brush if desired.

IMPORTANT TO KNOW

1. With ALL NANOX products, leaving the waxes on longer does NOT make the skis faster. We recognize these simple waxing protocols may not be what you're used to, however once you realize that you are faster with NANOX you'll appreciate the system.
2. To guarantee optimal performance with NANOX, it is required that the structure of the base conforms to the snow conditions and that the skis have been ground absolutely flat and fiber-free. 
3. Use Nanox Training wax repeatedly to condition bases. 
4. Nanox only protects the base by lasting longer but also creates changes to the base at the molecular level - known as “higher ground speed”. Use it exclusively and see the difference.
5. If you're ski touring, Supernano III can be used with skins. 

Used by: Alpine, Snowboard and Nordic competitors.

Trust NANOX. It's Simply Faster.
www.nanox-wax.com

SIDECUT® Ski & Snowboard tuning and wax products in Canada, USA, Europe, Norway, Sweden, Australia & New Zealand.